Category: Uncategorized

Having trees in your yard can be very beneficial. From having shade to cleaning up trees, there’s ups and downs, but in the end, it gives your yard a sense of nature in it. Having dead trees is something that you don’t want to have. There are many dangers to leaving dead trees or dying trees around your property. These dangers can be temporary and sometimes long lasting.

We’re here to tell you why it’s important to remove those trees from your property!

Dangers of Dying or Dead Trees on Your Property

The question isn’t when, it’s what if? Dead or dying trees aren’t as strong as they used to be. This probably doesn’t come as a surprise, but some homeowners put off the task of removing the trees that could cause harm to them and their property.

• Injuries to You and Your Family – Having dead trees in the yard can be a big factor in injuries to you and your family. Falling branches or limbs can cause injuries, which would make you responsible.
• Damage to Your Property – Dead and dying trees have the possibility of falling on your property and even your house. During a heavy storm, these can occur more frequently because of the weak trees.
• Costly Bills – The cost of dead and dying trees doesn’t cause damage to your wallet right away. When they fall and cause damage to your home and property, you may have a problem on your hands. Depending on your homeowners insurance policy, you may not have these events covered.

Big Foot Tree Services

The best thing to do in the situation of dead trees on your property is to have them removed. Staying proactive with your landscaping and yard maintenance is very important. At Big Foot Tree Services, we can remove those hazardous trees for you. Contact Big Foot Tree Services at 973-885-8000 today or visit us online for more information!

This post first appeared on https://www.bigfoottreeservice.com

Prevent your dying maple tree from becoming an extreme hazard to your property and wellbeing. By knowing what to do when your maple is in decline, you can save it from an otherwise early death.

toddsmariettatreeservices.com gathered information on how to identify when a maple tree is in decline, what is causing it to decline, and how you can nurse it back to health.

Maple Tree Diseases, Problems, and Solutions

To save a dying maple tree, it helps if you know why the tree is dying. When inspecting a dying maple tree, consider the following symptoms, their meaning, and what to do:

Chlorosis of Maple Tree Foliage

Your tree’s leaves should remain vibrant green (or red depending on the species) until the beginning of the fall season (when cooler weather sets in). If they are losing their color prematurely, this may be a symptom of:

• Poor soil drainage
• Compacted soil
• Poor root growth
• Damaged roots
• High soil alkalinity
• Nutrient deficiencies in the tree

Treatment for chlorosis varies depending on the cause. Consider the following measures to reverse this condition in the next growing season:

• Poor soil drainage requires the introduction of mixed layers of soil, the Installation of subsurface tile drains (sections of perforated pipe buried 12 to 18 inches below the soil surface), or working large quantities of organic material into the soil surrounding your tree.

Note: Take extra precautions to preserve tree roots when tilling or aerating soil within your tree’s root plate.

• Compacted soil and poor root growth generally occur hand-in-hand. You can reverse soil compaction by working large quantities of organic material into the soil surrounding your tree. Once the organic material has been worked into the soil, keep the entire root plate covered with a 3 to 6-inch layer of organic mulch.

Tip: The addition of earthworms will significantly speed up this process. They will draw organic material into the soil as they tunnel through it.

• Damaged roots can present a challenge as they are a gateway for a disease to quickly infect and severely compromise the health of your maple tree. Damaged roots from digging or lawnmower activity should be cleaned and treated with tree paint or pruning sealer.

• High soil alkalinity and nutrient deficiencies in the tree can be corrected by adjusting the soil pH and soil enrichment with organic material. The ideal soil pH range for maple trees is between 5.5 and 7.3. It can be lowered by using organic mulch, which coincidentally, will provide nutrients to your tree.

Water Sprouts and Tree Suckers

Water sprouts are a tree’s attempt to grow more branches, often after injury. If the tree is in decline or roots have been damaged, suckers may grow from the roots or base of the trunk. When suckers grow higher on the trunk, they’re referred to as water sprouts and usually appear at the site of a pruning wound, a crack, or some other damage.

Water sprouts and tree suckers deprive a tree of essential nutrients and energy. Even though this is typically an emergency response by the tree to heal or survive, they do more harm than good.

After removing water sprouts and tree suckers, address the injuries or deficiencies that prompted their growth.

Mushrooms on Your Maple Tree

If mushrooms are growing on your maple tree’s trunk or roots, you may have a severe problem. The presence of mushrooms and mushroom conks is a sign that the pulp of your tree is rotting. The fungi that produce mushrooms (the fruiting body of the fungus) flourish when fed by decaying organic material.

• Prune and dispose of branches with mushrooms growing on them.
• Have the tree treated or removed by a professional tree service when mushroom growth is located anywhere on the trunk or roots.
• Sanitize all equipment used on infected trees with a 1cup of bleach to 1gallon of water solution to prevent the spread of disease to other trees and plants.

Tip: As millions of spores can be produced and released by a single fruiting body, it is recommended to call a professional tree service to remove and dispose of them.

Read more about the significance of mushrooms growing on a tree at toddsmariettatreeservices.com/mushrooms-on-trunk-means-your-tree-dying/

Splitting Tree Bark

Tree bark splits or cracks for several reasons, and you cannot simply fix it. However, you can protect your tree while it compartmentalizes the damage and protect it from further damage by taking preventative measures.

While bark splitting is a common occurrence on younger trees, all trees are susceptible to bark splitting when exposed to the following conditions:

• Sunscald (Southwest Winter Injury)
• Frost Cracks
• Environmental Conditions (Drought)
• Herbicides (Glyphosate Products)

Bark splitting may also be caused by the swelling of the trunk or branch when infected by a rapidly reproducing pathogen.

As split bark presents an opportunity for successful attacks by disease or insects, call on the expertise of a professional tree service to assist you in protecting your maple tree as it compartmentalizes the damage.

Read more about the causes and treatment of splitting bark at toddsmariettatreeservices.com/tree-bark-splitting-can-i-fix-it/

My Tree Is Leaning

When your mature tree can no longer hold itself to the land or has broken away from its roots, it may lean before suddenly falling. This is a tree emergency and should be immediately removed by a professional tree service.

Younger, lighter trees can be cabled or staked in an attempt to stabilize them. This process may require several growing seasons before the tree’s root plate can successfully re-establish itself.

During this recovery time, the reason(s) for the tree’s destabilization should be diagnosed and corrected to avoid future occurrences.

Dieback

A sure sign that your tree is in distress is when branches begin to lose foliage, become brittle, and die. This often occurs when the branches in question are diseased or infested (these branches should be pruned from the tree).

However, when this condition is widespread throughout the canopy, it is referred to as dieback. Dieback occurs when:

• A pathogen is disrupting the tree’s hydraulic system
• Boring insects have consumed sufficient xylem or phloem to impede the back and forth flow of water and nutrients from the tree’s foliage to its roots
• The tree is suffering from severe drought conditions
• The tree is partially or entirely girdled

Unfortunately, by the time a tree shows signs of dieback, it may be too late to save it. However, the following may help it partially or wholly recover over several growing seasons:

• Promote the tree’s health by watering, fertilizing, pruning, and mulching it.
• Have the tree inspected and treated for boring insects and/or disease by a professional tree service
• Increase watering frequency during drought conditions
• Remove any roots, ropes, fencing, or vines that are circling the tree, restricting its water and nutrient flow

When treating a tree, keep in mind that as a tree’s health declines, it becomes vulnerable to secondary attacks by insects, pathogens, and even weather conditions. Always be on the lookout for multiple symptoms when diagnosing your maple tree’s problems.

My Tree Is Self-Pruning (Cladoptosis)

While maple trees are among those species that have a tendency to self-prune, consider the following causes when diagnosing your tree:

• A branch has become too shaded and can no longer sufficiently photosynthesize
• Poor pruning practices have left the canopy too dense, obstructing light from reaching inner branches
• Disease has debilitated the branch leading to its decline or hydraulic failure
• The branch is infested, triggering self-pruning as the tree’s defensive measure
• Climbing vines are blocking enough sunlight in the canopy to trigger cladoptosis

Cladoptosis occurs when there is a problem with your tree. If you are unable to detect the primary cause, get a professional tree service to help you before a falling branch causes catastrophic damage.

Saving a Dying Maple Tree

In this article, you discovered several of the conditions your maple tree may be dying from, and how to resolve them to save your tree.

By knowing what to look for, how to quickly treat your tree problems, and when to seek help, you can add countless years to its lifespan.

When you ignore or neglect to treat the often subtle signs of distress your tree displays, you may be sentencing it to certain death.

Sources:
web.extension.illinois.edu/focus/index.cfm?problem=chlorosis
ipm.illinois.edu/diseases/series600/rpd641/
canr.msu.edu/news/what_to_do_about_compacted_soil
extension.umd.edu/hgic/topics/water-sprouts
plantclinic.tamu.edu/2013/11/15/cladoptosis-an-interesting-phenomenon/

Are you thinking about having a tree or multiple trees removed from your property? If so, it’s essential you hire the person and company to do the job. When searching for the right tree removal company, make sure you know these three things about whom you’re working with.

Are You Licensed and Insured?

The biggest mistake home and business owners make is trusting in someone who is not a true tree care professional. Even if their intentions are well-meaning and they think they can handle the job, you should only entrust such a big project to someone with the proper certifications. Failing to do so will put you, your trees and properties at real risk and make you liable should anything go amiss.

What Type of Experience Does Your Staff Have?

Becoming an expert arborist takes years of experience. As is the case in many fields, there is no real substitute for experience. It takes years to develop a keen eye for knowing the best ways to safely remove trees and branches. You really don’t want to trust in a green arborist (cheesy pun intended) when choosing a tree removal company.

What’s Your Plan for the Job and How Will it Affect My Property?

In addition, you should know what their plan of attack is and what type of equipment will they be using. Moreover, how will the equipment affect the rest of your property? Could fallen branches destroy say your garden or lawn? These are things you’ll want to have ironed out before the actual work begins.

In the Wayne, NJ area, Big Foot Tree Service has built our repudiation by providing superior tree care, including tree removal services. To learn more about the ways we can help your property, contact us today.

This post first appeared on https://www.bigfoottreeservice.com

Prevent anthracnose from harming your trees, shrubs, and turf, causing their decline and eventual death. By knowing how to identify this pesky fungal disease, you can take steps to control and prevent it.

72tree.com gathered information to help you identify the symptoms of anthracnose, what it infects, how to treat it, and how to prevent the disease.

What Is Anthracnose

Anthracnose is the name given to a group of fungal pathogens that attack a wide variety of herbaceous and woody plants in spring with cool and wet weather. Fungi overwinter (lie dormant) in dead twigs and fallen leaves. Cool, rainy weather provides perfect conditions for emerging spores to spread.

Anthracnose Symptoms

Anthracnose symptoms can appear differently depending on what part of a plant or tree it has infected. The following will help you positively identify an anthracnose infection:

Twig, Branch, and Stem/Trunk Symptoms – Anthracnose infections on twigs most commonly appear as small orange-brown blisters or as a brown band encircling and girdling the young twig resulting in shoot death.

In more advanced cases, anthracnose can cause open wounds on branches, stems, and trunks. These open wounds typically appear sunken, dark, and wet.

Leaf Symptoms – Tan to dark brown irregular shaped blotches develop on young leaves, and they are typically distorted, cupped, or curled. When there is a severe anthracnose infection, premature leaf drop can occur in spring. When this happens, trees will usually produce a second growth of foliage by midsummer.

An anthracnose infection may cause identical spots on mature leaves. Still, these leaves generally do not portray the cupped or distorted appearance. These spots on mature leaves are frequently accompanied by minor wounds from insect feeding.

For trees, these symptoms are typically most severe on lower and inner branches but can travel up through the entire canopy.

Fruit Symptoms – Anthracnose fruit rot is identified as brown to black, water-soaked, sunken spots on green and ripe fruit. These lesions can develop over time, depending on weather conditions during disease development.

Grass/Turf Symptoms – Anthracnose diseases are common and destructive problems in landscapes and golf course greens with creeping bentgrass or annual bluegrass.

Anthracnose may develop in grasses as a foliar blight, in which grass leaves are infected, or a basal rot, attacking leaf sheaths, crowns, and stolons.

Anthracnose symptoms in grass and turf can be highly variable. Consider the following:

•Yellow to orange spots in irregular patterns
•Small freckle-like spots
•Circular patches reaching a foot in diameter

Symptoms are typically most severe in areas that are stressed from low mowing, excessive traffic, or inadequate irrigation or fertilization.

These symptoms first appear on the oldest growth, which dies back from the tip. The disease then gradually progresses to the younger leaves.

As the disease progresses from the foliage to basal rot, the leaf sheaths, crowns, and stolons will be darkened and rotten.

Tip: Use a magnifying glass to identify acervuli. These black, saucer-shaped pads with protruding black spines (setae) are the disease’s reproductive structures filled with spores.

Anthracnose Disease Cycle

An anthracnose disease cycle starts when a host is infected in spring or early summer from spores in fallen leaves, infected twigs/limbs, and lesions called cankers. Leaf infections commonly progress to stem and bud infections where the pathogen continues to grow and cause dieback.

Dieback is frequently the result of cankers growing over multiple years and, unless treated, will result in hydraulic failure to foliage, the decline in health, and vulnerability to deadly pathogens and/or infestations.

Generally, anthracnose infections are not lethal to plants and trees. But, if the pathogen is left to flourish for multiple growing seasons, it will weaken its host, allowing other diseases or insects to successfully attack and kill it.

Anthracnose Treatment

Due to the ease in which anthracnose spreads and infects plant life, once identified, fast action is required to prevent a wide-spread, severe outbreak. The following will help you reduce transmission of the pathogen:

•Apply a broad-spectrum, non-toxic bio-fungicide safe for organic use directly on and around infected areas
•Halt all overhead watering practices and install drip lines where possible
•Carefully prune and destroy all infected foliage, stems, and branches
•Collect and destroy fallen leaves, twigs, and debris from beneath infected trees, shrubs, and plants throughout the growing season and summer months
•Sanitize all pruning and gardening equipment after each use with a one part bleach to 4 parts water solution
•Call a professional tree service to treat cankers on tree trunks (tree removal may be required in more severe stages of infection)
•Do not walk through or work on your garden, lawn, or shrubs when they are wet
•Avoid composting infected foliage, fruit, cuttings, or stems
•Thoroughly clear debris from gardens and from under shrubs and trees in the fall to reduce overwintering opportunities for fungal spores

Read more about treating and eliminating fungi at 72tree.com/how-to-get-rid-of-tree-fungi/

Anthracnose Prevention

While it can be challenging to prevent, the following measures will help you protect your garden, bushes, and trees from anthracnose:

•Use western grown seeds which have not been exposed to anthracnose
•Plant disease-resistant species when possible
•Water, fertilize, prune, and mulch your plants and trees to promote their health
•Apply liquid copper sprays weekly throughout the growing season
•Apply sulfur powders weekly throughout the growing season
•Apply neem oil at the first sign of budding, then weekly throughout the growing season

Note: Neem oil is an organic, multi-purpose fungicide, insecticide, and miticide eliminating all stages of insects while preventing fungal attacks.

Anthracnose Symptoms, Treatment, and Prevention

In this article, you discovered what anthracnose is, how to identify it, and measures to treat and prevent it from harming your landscape.

By taking swift action to halt the progression and prevent anthracnose infections, you are preserving the health of your grass, plants, shrubs, and trees.

Allowing anthracnose to spread without treatment will leave the plant life on your landscape in poor health and susceptible to more deadly pathogens and infestations.

Sources:
extension.umn.edu/plant-diseases/anthracnose-trees-and-shrubs
content.ces.ncsu.edu/anthracnose-in-turf
ipm.illinois.edu/diseases/series600/rpd621/index.html
missouribotanicalgarden.org/gardens-gardening/your-garden/help-for-the-home-gardener/advice-tips-resources/pests-and-problems/diseases/anthracnose.aspx

This article was first published on: http://www.72tree.com/symptoms-of-anthracnose/

Although a tree stump may be an eyesore in your yard, you may be wondering whether it’s a necessity to have it removed, or whether you can wait for it to decay or make it a problem for a later day. Although by definition it is not necessary to have it removed, it is the prudent course of action to do so. Here’s why:

Tree Stumps Are a Safety Hazard To Humans, Pets and Equipment

Tree stumps cause a safety issue to homeowners, especially when it is dark out as it can easily trip someone. What’s more, if you have small children and/or pets roaming around and playing in your lawn daily, a tree stump can cause injury.

In addition, a tree stump makes lawncare more difficult, and could cause a great deal of damage to your lawn mower if you accidentally run over it when trying to work around it.

Tree Stumps Attract Pests and Unwanted Plants

Whether it’s carpenter ants looking to feed on decaying wood or other insects in search of food, a tree stump often serves as a home to unwanted pests and insects. Carpenter ants may even set up shop right in the stump and lie down nests. And of course, anytime there is dying wood nearby, you have to worry about termites coming by, as well as microbes and other organisms appearing during the decomposition process. Intrusive plants like mushrooms can also develop, which could be a hindrance to other healthy plants nearby that you want to flourish, as well as a dangerous draw for dogs and cats.

Tree Stumps May Not Be Done Growing

Another disadvantage of leaving a tree stump in place is that the roots may continue to grow, which could cause all sorts of damage to your property. For example, a new root could hit a pipe, or damage a walkway or other part of your home.

As the old adage goes “it’s always better to be safe rather than sorry,” and this is especially true regarding tree stumps. At the very least, you remove an unsightly presence from your property, and in all likelihood, you’ll be removing a hazardous liability from your premises.

If you’re in the Wayne, NJ area and need a tree stump removed, contact the experts at Big Foot Tree Service.

This post first appeared on https://www.bigfoottreeservice.com

Avoid catastrophic property damage or serious injury when your tree sporadically drops a branch. By knowing why and how this happens, you can take the preemptive steps to stop it from disrupting your life and property.

toddsmariettatreeservices.com defines what self-pruning is, how it happens, why it happens, and which tree species are more likely to do it.

What is Self-Pruning

Self-pruning or cladoptosis is a compartmentalization process involving the shedding of shaded, diseased, or infested branches that have become a drain or a burden on a tree’s resources.

Further defined, this is nature’s way of letting a tree determine which branches need to go, rather than an arborist or a property owner making the decision for it.

Note: On wooded land, self-pruning is a common occurrence, especially in densely populated stands where there is not sufficient sunlight for trees to keep all of their branches. Branches low on tree trunks will likely die from shading and competition, occurring over several growing seasons.

How Self-Pruning Happens

Self-pruning occurs the same way fall foliage, shoots, and twigs are shed from a deciduous tree. As it does with leaves, ripe fruit, flowers, and seeds, a tree will form an abscission layer where the branch connects to the trunk (at the branch collar) and shed the branch cleanly.

Why Self-Pruning Happens

Several reasons can cause a tree to self-prune. Consider the following possibilities:

• A branch is too shaded and cannot sufficiently photosynthesize
• Poor pruning has left the canopy too dense, obstructing light from its reaching inner branches
• Disease has infected the branch causing its decline or hydraulic failure
• The branch has become infested, triggering self-pruning as the tree’s defensive measure
• Climbing vines have blocked sufficient sunlight in the canopy to trigger cladoptosis

Self-pruning is more prevalent in dense forests, orchards, more mature trees, and landscape areas that have been over-planted.

Basically, when a tree branch cannot sufficiently photosynthesize (due to a lack of sunlight) or has triggered an infection or infestation response, the tree can spring into action and self-prune the branch.

Regarding shaded branches, how long one survives will vary among tree species and its degree of shade tolerance. Shade tolerance relates to the capacity of a tree species to compete and thrive under shaded conditions. Shade-tolerant species like American beech and eastern hemlock are More proficient at balancing photosynthesis and respiration when growing with severely limited light.

Sometimes, the death of a branch does not necessarily ensure its shedding. Although the tree shuts the branch off from water and nutrients, depending on the species, it won’t sever it. In these cases, the tree enlists outside help. These dead branches persist until further weakened by fungi, insects, animals, wind, snow, ice, or gradual decay. At some point, the branch will weaken and fall from its own weight.

Note: In well-kept yards and landscapes, dead, dying, and diseased branches are usually pruned away before cladoptosis can take place.

Trees That Self-Prune

Self-pruning is more prevalent in the fall, and as your trees age, they are more likely to shed more limbs. The following species are known to self-prune, and can do it without warning:

• Ashes
• Aspen
• Birch
• Cherries
• Cypress
• Elms
• Eucalyptus
• Larches
• Maples
• Oaks
• Pecans
• Pines
• Poplars
• Walnut
• Willow

While it is good practice to remove limbs that grow over your home or other structures, it is necessary to remove them if you have a tree species known to self-prune.

How To Prevent Trees from Self-Pruning

Even with the best care and attention to the needs of your tree, you may not be entirely successful at preventing it from self-pruning. However, the following will help you slow this natural process:

Tree Health – From the time your tree is planted, you should provide it with:

• Water (two to three waterings per week and more often during drought conditions)
• Soil (test frequently to adjust nutrient levels and soil pH)
• Mulch (to protect the root plate and regulate soil temperature); click here to learn more about mulching
• Prune (to encourage healthy growth and remove unwanted/unneeded growth)
• Inspect (annual inspections by a professional tree service can help detect issues before they develop)

Tip: When selecting a tree species for your yard or landscape, choose a species that is appropriate for your region’s climate and not prone to self-pruning.

Cladoptosis

In this article, you discovered the definition of self-pruning trees, how the process happens, what causes it, and the species most likely to do it.

By taking steps to increase the health of your tree and the sunlight it receives, you can avoid being taken by surprise when your tree suddenly drops a branch.

Allowing your tree to grow without proper care and attention can lead to it self-pruning unannounced, suddenly dropping branches, causing catastrophic damages to anything or anyone below.

Sources:
northernwoodlands.org/articles/article/woods-whys-self-pruning-branches
cals.arizona.edu/yavapai/anr/hort/byg/archive/pruningshadetrees.html
plantclinic.tamu.edu/2013/11/15/cladoptosis-an-interesting-phenomenon/
warnell.uga.edu/sites/default/files/publications/Tree%20Anatomy%20Defining%20Twigs_14-21.pdf

Don’t let your tree die from being toppled in a storm. Knowing how windthrow and windsnap can topple trees will help you increase their natural defenses against it.

72tree.com gathered information on what windthrow and windsnap are, what causes them, and how they can be prevented.

What is Windthrow?

Windthrow occurs when trees are toppled by wind. When windthrow occurs, trees are uprooted as they are blown over.

What is Windsnap?

Windsnap also occurs when trees are toppled by wind. When windsnap occurs, trees are broken off at the trunk as they are blown down.

Windthrow and Windsnap Causes

While wind is a contributing factor to windthrow and windsnap, it is not the primary cause (under normal circumstances). Consider the following:

What Causes Windthrow – Windthrow can topple the seemingly sturdiest of trees in the lightest of breezes or most furious of winds. Consider the following conditions that can lead to windthrow:

•Earthquakes can loosen tree roots from their soil, leaving the tree destabilized
• Floods can over-saturate the soil surrounding a tree, leaving roots with nothing to grip
• Excessive rains can also over-saturate the soil around a tree
• Snow accumulation can add enough weight to the tree to overpower its roots
• Construction activities can cause soil compaction, leading to root death
• Deep trenching too close to a tree can sever its roots
• Erosion can strip soil and sediments away from the root plate, leaving roots exposed
• Root rot caused by disease, leaving roots soft and without anchoring power
• Improper watering can cause roots to grow too close to the surface, offering little to no support

Either by nature or neglect, when roots are destabilized, any amount of wind can catch the tree’s canopy, disrupt its balance, and topple it without notice.

Note: A tree’s root plate expands outward from the trunk and continues to its dripline. While roots can grow beyond the dripline, those within it should be nurtured and protected throughout the tree’s life.

What Causes Windsnap – Windsnap brings down trees when the trunk/stem snaps, completely separating the crown and a portion of the trunk from the root system left in the ground. The following conditions can lead to windsnap:

• Sudden severe wind “microbursts”
• Poor trunk and limb development from bad pruning practices
• Diseases that cause hydraulic failure like blight
• Heart rot caused by fungi that feed on the inner wood of the trunk

Another term used to represent both windthrow and windsnap is “blowdown.” This term is usually applied when both windthrow and windsnap occur in the same place. Events that can lead to blowdown include:

•Hurricanes
• Tornadoes
• Typhoons
• Tropical storms
• Hail storms
• Bomb detonations
• Factory explosions
• Volcanic eruptions (pyroclastic flows)
• Meteor impacts or atmospheric explosions

For trees that somehow manage to remain standing after such events, they will likely have been stripped of their leaves and bark, sentencing them to certain death.

Note: In 1980, the eruption of Mt. St. Helens destroyed more than 4 billion board feet of timber by windthrow and windsnap.

In 1945, an atomic bomb was detonated 2,000 feet over the city of Hiroshima, destroying five square miles of the city and flattening nearly all vegetation. Incredibly, 170 trees survived the explosion within one and a quarter-mile of ground zero, and are alive today.

And in 1908, the Tunguska explosion (believed to have been a meteorite) caused a blowdown of trees within 2,000 square kilometers of forest.

Windthrow and Windsnap Prevention

We can’t stop the weather. Even with all of the technology and advanced warning systems available, we still cannot reasonably predict how severe weather events will affect our trees. The following will help you fortify your trees to keep them from suffering windthrow and windsnap:

Planting – You can best protect your tree by planting it in a location observing the following:

• Plant your tree in a location protected from prevailing winds or known storm paths
• The location should be well-drained and not prone to flooding
• The sun/shade ratio should accommodate the tree species

Be mindful of the structures (fences, sheds, buildings, hills, etc.) and vegetation that surround the tree and can serve as a windbreak.

Read 72tree.com/beginners-guide-tree-planting/ for more tree planting tips.

Watering – Watering your tree is fundamental in encouraging roots to grow deep, offering improved stability and resistance to windthrow:

•Water newly planted trees three to four times per week
• During periods of drought, increase the frequency and duration of waterings
• Do not use overhead watering, it spreads disease, instead, use a drip or soak method

Water benefits every aspect of your tree’s health and long life. Without it, hydraulic failure can cause its fast and untimely death.

Fertilizing – When planting and each year after that, the soil (principally within the dripline) should be tested to gauge the amount of nutrients and pH level. Liquid, granular, and organic fertilizers can be used to adjust your soil as needed.

Mulching – Mulching the root plate will help the soil retain moisture and regulate soil temperature throughout the year.

Pruning – Proper seasonal pruning will encourage healthy growth and strength of your tree’s structure. Crown thinning will also help prevent blowdown by offering less resistance to wind.

Windthrow and windsnap prevention also depends on keeping your trees disease and pest free. By encouraging their growth and providing responsible seasonal care, trees are capable of fending off most threats. However, when there is a disease or pest outbreak in your region, call an ISA certified arborist to evaluate your tree and recommend preventative measures.

Read more about tree pests and diseases at 72tree.com/5-tree-pests-diseases-avoid-spring/

Windthrow, Windsnap, and Blowdown

In this article, you discovered the difference between windthrow and windsnap, what events can cause them, and steps you can take to prevent them.

By encouraging your trees to grow healthy and well-rooted, you can give them a better chance of surviving severe weather events.

Allowing your trees to grow without proper care and attention can create an opportunity for it to be blown over or snapped, causing catastrophic damages and financial loss when landing on your home or car.

Sources:

canr.msu.edu/news/why_trees_fail
fs.fed.us/r3/resources/health/field-guide/nid/windthrow.shtml
extension.purdue.edu/extmedia/fnr/fnr-faq-12-w.pdf
extension.msstate.edu/sites/default/files/publications/publications/p2683.pdf
space.com/5573-huge-tunguska-explosion-remains-mysterious-100-years.html
pubs.usgs.gov/gip/msh/impact.html

This article was first published on: http://www.72tree.com/blowndown-windthrow-windsnap/

All home and business owners want trees that look healthy and will beautify the exterior of their properties. In order to achieve those goals, it’s vital to have a tree pruning plan in place.

What is Tree Pruning?

Put simply, like humans need to clip their nails, trees need to have some of their parts removed, including deteriorating branches and buds. Tree parts can wither away for a wide range of reasons, including from too much sunlight, too many insects living in it and from a severe storm and temperature fluctuations.

Why Should You Have Your Trees Pruned?

For starters, pruning diseased parts will provide your tree with a chance to grow safer, replacement branches and buds. What’s more, it’s important for structural reasons, since proper pruning can help your tree grow sturdier.

Of course, you may also have to prune your trees for safety reasons; perhaps there is a branch inching close to a power line or maybe one is becoming a  safety hazard that could land on your garage, parked car, shed or some other spot on your property.

Another reason could be to open walkways; after all, a business does not want a bunch of branches clogging up walkways and homeowners want to avoid branches, sticks and debris lying on sidewalks.

Ultimately ,having your trees pruned provides the best of both worlds – style and functionality. It makes your property more aesthetically pleasing, while also preventing safety issues caused by overgrown or diseased branches or buds. What’s more, pruning also increases air flow within trees, meaning you’ll have healthier leaves.

In the Wayne, NJ area, Big Foot Tree Service provides a wide range of professional tree care services, including tree pruning. To learn more about our services, contact us.

This post first appeared on https://www.bigfoottreeservice.com

Allowing a tree to fall ill and die can impact other plants in your yard, or result in catastrophic damage to your property and wellbeing. By knowing how to protect trees from planting to maturity, you are giving them the best chance to thrive.

toddsmariettatreeservices.com gathered information about the steps you can take to protect your trees from multiple threats and hazards.

Right Tree Right Place

Before even planting a tree, your first measure of protection for it is to select an appropriate species along with choosing the best location to plant it. When choosing a tree species, consider the following:

• Do you prefer an evergreen or a deciduous tree
• Is it a flowering species
• Is the species cold hardy for your location on the USDA plant hardiness zone map
• Is the species an overstory or understory tree
• Is the species known to have invasive roots
• Has the species developed resistance to any local pathogens or pests
• What problems are the species known to develop as it matures

Once you have determined the species of the tree you would like to plant, it’s time to find the right location. When selecting the location of your new tree, take the following into consideration:

• Is the location sheltered from the wind
• Does the location receive full sun
• Is the soil well-drained
• Is the location far enough from structures and other trees to avoid root damage
• Are underground utility lines far from the location
• Look up. Is there anything overhead that could obstruct or interfere with the tree’s growth

When considering the location for your new tree, keep in mind that a growing tree cannot simply move a few feet to the left. As you select a planting location, remember that your tree will be in that spot for many decades.

Building and Structure Placement

As your landscape evolves, the protection of your trees must be at the forefront of your plans and designs. The following will help you make informed decisions about changes to your landscape and hardscape.

• Buildings, sheds, and fences can serve as wind blocks
• Keep new underground water, sewer, cable, and electrical lines far from your tree’s root system
• Keep patios, walkways, driveways, and other features from encroaching on the root plate (within the drip line) of your tree.

Roots exist to absorb oxygen, water, and nutrients for the livelihood of the tree. Much of this process occurs in the top 6 to 8 inches of soil within the tree’s drip line (edge of the canopy). Trees can be best protected by having trenching, construction, and feature installation done outside the drip line, away from the tree.

Read more about tree protection during construction projects at toddsmariettatreeservices.com/protection-instructions-construction-landscaping-hardscaping/

Protect Your Tree from Soil Compaction

Soil compaction occurs when foot traffic, vehicle movement, equipment storage, or natural conditions cause the soil to compact and harden. This condition is particularly deadly when it occurs in areas surrounding trees. Tree roots are unable to absorb oxygen, nutrients, and water from compacted soil, and under these conditions will cause hydraulic failure and death of the tree.

The following are ways to protect your tree from soil compaction:

• Mulch the entire root plate
• Divert all foot traffic away from your trees
• Avoid storing parts and equipment of any kind under your trees
• Keep soil moist (not wet)
• Fence off trees during construction projects

Read more about the benefits of mulching and how it helps prevent soil compaction at toddsmariettatreeservices.com/proper-mulching-techniques-around-trees/

Protect Your Trees From Freeze

Whether your tree is evergreen or deciduous, there are some risks to leaving it exposed to sustained freezing temperatures (below 32 degrees) as it matures. Winter tree injury can appear as the following:

• Dried out evergreen foliage
• Broken limbs and branches from snow/ice weight
• Southwest injury or sunscald

Winter injury can be avoided by more efficient watering, tree wrapping, and bark wrapping. Taking steps to protect your trees in the first three to five years of growth will help it defend itself from injury as it reaches maturity.

Read more about winter protection for trees at toddsmariettatreeservices.com/how-to-protect-your-trees-winter/

Pruning, Cutting, and Emergency Tree Removal

One of the most critical measures of tree protection is pruning. As your tree matures, it can develop abnormal growth, become infested, suffer from a disease, and be damaged during severe weather events.

Pruning or cutting dead or diseased branches helps your tree direct its energy to new, healthy growth. When disease and infestations occur on the tree trunk, the only remaining option may be to remove the affected tree. This, at times, is the only way to save other healthy trees from suffering the same fate.

Read more about tree pruning, cutting, and emergency removal at toddsmariettatreeservices.com/right-time-cutting-pruning-emergency-tree-removal/

Tree Protection

Besides maintaining the tree(s) on your property, there are many other ways you can help protect trees in your community and around the globe. The following are ways you can participate in the reduction of demand for timber and help preserve our forests:

• Encourage stewardship
• Reduce the amount of paper you use
• Exchange paper products for those made of alternative material
• Recycle used paper
• Reuse gift bags
• Buy used wooden furniture
• Borrow, share, and donate books
• Switch to digital books and reading material
• Educate others
• Support reforestation efforts
• Plant a tree

Any steps you take in the direction of tree protection and conservation add to a global movement to preserve our national and urban forests. Read more about encouraging stewardship and how tree ordinances are drafted and enacted at mortonarb.org/trees-plants/community-trees-program/protecting-trees

Preserving And Protecting Trees

In this article, you discovered information about how you can protect your trees from hazards and how to participate in the protection of trees in our urban and national forests.

By taking steps to protect your tree from its planting to its maturity, you can avoid the dangers of a sick or dying tree, causing significant damages when it falls.

Ignoring steps to protect trees can result in expensive damages and the abrupt loss of invested time and effort.

Sources:
canopy.org/tree-info/caring-for-trees/protecting-trees-from-freeze/
treessc.org/how-to-protect-a-tree/
extension.colostate.edu/topic-areas/yard-garden/protecting-trees-during-construction-7-420/
selectree.calpoly.edu/right-tree-right-place/
extension.umn.edu/soil-management-and-health/soil-compaction

The post How To Protect Trees appeared first on http://www.toddsmariettatreeservices.com.